Peloton BikePlus Generic Power Cord

Write a Review

Your Price: $27.00

Retail Price:$39.99

You Save:$12.99(32%)

Peloton BikePlus Generic Power Cord

Questions about this item? Ask here.

Part Number: PT0106

Availability: Out of Stock.

Description
Questions and Answers
Feature 6

Peloton® Bike+ Generic Power Cord

Unlike the original generational model that utilized a barrel-prong connection, the Peloton® Bike+ (Bike Plus) uses a 65W USB-C Power Adapter. Because this premium model relies on the Power Delivery (PD) protocol to run the automatic resistance motor, the screen display, and the internal logic boards, replacing a broken or pet-chewed cable requires careful consideration of electrical specifications.

Technical Specifications & Drivetrain Requirements

When sourcing a generic or alternative power cord for the Bike+, using standard phone chargers will cause the console to constantly reboot or throw power-insufficiency error screens. Ensure your replacement hardware matches these exact parameters:

Total Wattage Capacity: Must be rated for a minimum of 65W (Watts) to handle simultaneous screen operation and servo motor shifts.
Voltage/Amperage Profile: Supports continuous outputs of 20V at 3.25A (Direct Current) matching the original factory profile.
Connector Profile: Male USB Type-C output terminal tip that connects directly into the rear electronic shroud socket at the base of the bike framework.
Safety Approvals: Look for certifications like UL Listed or CE markings, featuring integrated over-current, over-voltage, and short-circuit protection grids to isolate your console motherboard from unexpected line surges.

The 3-Step Setup & Routing Sequence

Replacing or routing an alternative power supply module takes less than 5 minutes to restore a clean, safe power connection:

1.Isolate the Main Wall Link and Unplug:Disconnect Pre-Existing Hardware.

Unplug any remaining damaged power cord segments from the wall. Gently disconnect the USB-C terminal tip from the input socket near the bottom rear stabilizer bar of the bike frame.

2.Inspect Adapter Rating and Align Ports:Confirm Voltage Configuration.

Verify the labels on your new 65W USB-C Power Supply read 20V/3.25A to confirm safe delivery lines. Plug the wall-side prong cable firmly into your alternative block module to establish a continuous wire run.

3.Insert the USB-C Tip and Check the Console:Route and Initialize System.

Push the USB-C prong straight into the bike's base power port until it clicks securely. Route the cable through the integrated frame clip to prevent it from tangling under the flywheel, plug the brick into a surge protector, and wait for the screen logo to initialize.

Maintain Continuous Power Flow and Protect Your Console

Cutting corners with a cheap, uncertified alternative or a phone-charger brick can introduce unstable electrical noise into your bike's sensitive data buses, cause unexpected calibration drops, or permanently fry the internal auto-follow resistance motors. Upgrading to a heavy-duty, certified alternative ensures that your console receives smooth, uninterrupted voltage lines, whether you are coasting through warm-up sets or hammering out high-intensity climbing metrics. Choose a robust, thick-jacketed power source built to handle high continuous thermal loads, keep your home gym floor clutter-free, and ensure your machine remains fully active for your next studio interval class.

Peloton BikePlus Generic Power Cord

Recently Viewed Items